Plotting is straightforward:
$ cis plot variable:filenames
This will attempt to locate the variable
variable in all of the specified
filenames, work out its metadata, such as units, labels, etc. and the appropriate chart type to plot, so that a line graph is used for two dimensional data, a scatter plot is used for three dimensional ungridded data and a heatmap for three dimensional gridded data. Other types of chart can be specified using the
--type option. Available types are:
- a simple line plot, for three dimensional data the third variable is represented by the line colour
- a scatter plot, for three dimensional data the third variable is represented by the maker
- a heatmap especially suitable for gridded data
Basemap versions <= 1.0.7 have known issues when plotting heatmaps, particularly when using
options. Use a newer version if available, otherwise check your output for validity, especially around the meridians.”
- a standard contour plot, see contour options
- a filled contour plot, see contour options
- allows two variables to be plotted against each other, specified as
cis plot variable1:filename1 variable2:filename2 --type comparativescatter
- a collection of plots overlaid on one another, see overlay plots
- a heatmap overlayed with a scatter plot, see scatter-overlay plots
filenames is a non-optional argument used to specify the files to read the variable from. These can be specified as a comma seperated list of the following possibilities:
- A single filename - this should be the full path to the file
- A single directory - all files in this directory will be read
- A wildcarded filename - A filename with any wildcards compatible with the python module glob, so that *, ? and  can all be used. For example
Note that when using option 2, the filenames in the directory will be automatically sorted into alphabetical order. When using option 3, the filenames matching the wildcard will also be sorted into alphabetical order. The order of the comma separated list will however remain as the user specified, e.g.:
$ cis plot $var:filename1,filename2,wildc*rd,/my/dir/,filename3
filename2, then all the files that match
wildc*rd (in alphabetical order), then all the files in the directory
/my/dir/ (in alphabetical order) and then finally
9.1. Plot Options¶
There are a number of optional arguments, which should be entered as a comma separated list after the mandatory arguments, for example
variable:filename:product=Cis,edgecolor=black. The options are:
- colour of markers, e.g. for scatter plot points or contour lines, see Available Colours and Markers
- colour map to use, e.g. for contour lines or heatmap, see Available Colours and Markers
- the minimum value for the colourmap
- the maximum value for the colourmap
- colour of scatter marker edges (can be used to differentiate scatter markers with a colourmap from the background plot)
- shape of scatter marker, see Available Colours and Markers
- name of datagroup for the legend
- the data product to use for the plot
Additional datagroup options for contour plots only:
- the number of levels for the contour plot
- a list of levels for the contour plot, e.g.
- options are
false, if true then contour labels are shown
- width of the contour lines
- size for labels on contour plot
label refers to the label the plot will have on the legend, for example if a multi-series line graph or scatter plot is plotted. To set the labels of the axes, use
--cbarlabel can be used to set the label on the colour bar.
The axes can be specified with
--yaxis. Gridded data supports any coordinate axes available in the file, while ungridded data supports the following coordinate options (if available in the data):
variable- the variable being plotted
If the product is not specified, the program will attempt to figure out which product should be used based on the filename. See data-products to see a list of available products and their file signatures, or run
cis plot -h.
9.2. Saving to a File¶
By default a plot will be displayed on screen. To save it to an image file instead, use the
--output option. Available output types are png, pdf, ps, eps and svg, which can be selected using the appropriate filename extension, for example
9.3. Plot Formatting¶
There are a number of plot formatting options available:
- The label for the x axis
- The label for the y axis
- The label for the colorbar
- The angle for the ticks on the x axis
- The angle for the ticks on the y axis
- The title of the plot
- The width of an item. Unit are points in the case of a line, and points squared in the case of a scatter point
- The size of the font in points
- The colour map to be used when plotting a 3D plot, see Available Colours and Markers
- The height of the plot, in inches
- The width of the plot, in inches
- The width of the histogram bins on the x axis
- The width of the histogram bins on the y axis
- The orientation of the colour bar, either horizontal or vertical
- Hides the colour bar on a 3D plot
- Shows grid lines
- width of the plot in inches
- height of the plot in inches
- this can be used to change the size of the colourbar when plotting and defaults to 0.55 for vertical colorbars, 1.0 for horizontal.
- The colour of the coastlines on a map, see Available Colours and Markers
- Use the NASA Blue Marble for the background, instead of coastlines, when doing lat-lon plots
9.4. Setting Plot Ranges¶
--vstep can be used to specify the range of values to plot, where x and y correspond to the axes and v corresponds to the colours.
When the arguments refer to dates or times, they should be in the format
YYYY-MM-DDThh:mm:ss, where the time is optional. A colon or a space is also a valid date and time separator (if using a space quotes are necessary).
step arguments are used to specify the tick spacing on the axes and
vstep is used to specify the tick spacing on the colorbar.
step arguments refer to an amount of time, they should be in the ISO 8061 format
PnYnMnDTnHnMnS, where any particular time group is optional, case does not matter, and
T can be substituted for either a colon or a space (if using a space quotes are necessary).
For example, to specify a tick spacing of one month and six seconds on the x axis, the following argument should be given:
Note: If a value is negative, then an equals sign must be used, e.g.
To plot using a log scale:
- The x axis will be plotted using a log scale of base 10
- The y axis will be plotted using a log scale of base 10
- The values (colours) will be plotted using a log scale of base 10
9.5. Overlaying Multiple Plots¶
--type overlay allows multiple files to be specified on the command line to be plotted, each with its own type, which is specified as e.g.
type=heatmap, along with the other datagroup options. Currently supported plot types are
scatter. An additional datagroup option available is
transparency, which allows the transparency for a layer to be set.
transparency take a value between 0 and 1, where 0 is completely opaque and 1 fully transparent.
For example, to plot a heatmap and a contour plot the following options can be used:
cis plot var1:file1:type=heatmap var2:file2:type=contour,color=white --type overlay --plotwidth 20 --plotheight 15 --cbarscale 0.5 -o overlay.png
Note that the first file specified is treated in a special way, from this the default plot dimensions are deduced, and the colorbar displayed will be for this datagroup only.
9.6. Scatter Overlay Plots¶
Note that scatteroverlay is to be depreciated, as the overlay option will allow a more general method for overlaying multiple datasets
Three types of plot overlay are currently available:
- Overlaying several line graphs
- Overlaying several scatter plots
- Overlaying a heatmap with several scatter graphs
To overlay several line graphs or scatter plots, simply use the plot command as before, but simply specify multiple files and variables, e.g.:
$ cis plot $var1:$filename1:edgecolor=black $var2:$filename2:edgecolor=red
To plot two variables from the same file, simply use the above command with `` $filename1 `` in place of `` $filename2 ``.
To overlay a heatmap with several scatter graphs, use the following command:
$ cis plot $var1:$filename1:label=label1 $var2:$filename2:color=colour2,itemstyle=style2,label=label2 $var3:$filename3:color=colour3,itemstyle=style3,label=label3 --type scatteroverlay
Where `` $filename1 `` refers to the file containing the heatmap data and the other two filenames refer to the files containing the scatter data.
If the scatter data is 3 dimensional, then the colour argument can be omitted and the data will be plotted using the same colour map as the heatmap. This can be overridden by explicitly including the colour argument.
9.7. Available Colours and Markers¶
CIS recognises any valid html colour, specified using its name e.g. red for options such as item colour (line/scatter colour) and the colour of the coast lines.
A list of available colour maps for 3D plots, such as heatmaps, scatter and contour plots, can be found here: colour maps.
For a list of available scatter point styles, see here: scatter point styles.